Equipment used
CSM360 is the portable, manually operated system with two powder feeders. The handheld gun is connected to a separate powder station.
CSM360 specifications and setupBALTiCOLD SPRAY / CAR BODY ZINC COATING
Car body zinc coating.
Watch the process.
A filmed CSM360 workshop sequence. The video shows the process steps on the component; the notes below distinguish visible work from performance that still needs verification.
FILMED WORKSHOP CASE / CSM360
Car body panel.
Preparation to zinc coating.
A 39-second edit of work on a lower rear body panel: surface preparation, a change at the two-feeder powder station and manual zinc deposition.
- 01Prepare the surface
The operator treats the exposed area along the lower panel before coating.
- 02Change the powder feed
The film shows the operator moving to the two-feeder CSM360 station and changing the feed selection.
- 03Deposit zinc
Manual passes cover the prepared area. Zinc is the material identified by the owner for this footage.
What this footage demonstrates
Discuss a similar application The film documents the visible workshop sequence. It does not provide the zinc powder grade, coating thickness, adhesion, corrosion-test results or an approved body-repair procedure. Vehicle corrosion protection and repair suitability must be verified on the actual panel and service conditions.
Download video
FROM FOOTAGE TO YOUR APPLICATION
Use the case as a starting point.
Plan a comparable trial
Share the base material, damaged area, target dimensions and service conditions. Agree the surface checks and acceptance procedure before treating a service component.
Discuss a similar component