One powder feeder
A single-feed configuration suits work with one selected powder at a time. Material changes require an appropriate emptying and cleaning procedure.
COMPACT · ONE FEEDER · DEVELOPMENT
CSM108.2
One feeder.
A focused process.
An 8 kg compact low-pressure cold spray system with one powder feeder. Suitable for evaluating coating processes and specialized work, with manual operation or potential integration into automated systems.
1powder feeder
8 kgequipment mass
5–8 baroperating pressure
0.4 m³/mincompressed air
DESIGNED FOR YOUR WORKFLOW
What CSM108.2 brings to the job.
Small rack footprint
The specification lists a 275 × 270 × 210 mm rack assembly and 8 kg total equipment mass.
Manual or integrated use
The supplied sheet permits manual use and installation in automated or robotic systems. Confirm the integration package for your project.
Coating and abrasive modes
Metal deposition and sand-blasting capability are listed. Select the correct powder, nozzle and surface-preparation procedure.
TECHNICAL DATA
Plan the complete setup.
Equipment data are the starting point. Confirm the supplied configuration and validate your process before production.
Read the values correctly
9 bar is the owner-confirmed maximum inlet pressure. The source sheets contain an incorrect psi conversion; it is not repeated here.
200–600 °C refers to gas at the nozzle inlet, not the component or particle temperature.
The published noise and warm-up figures are specification statements, not guarantees for every installation. Assess the actual workplace.
| Powder feeders | 1 |
|---|---|
| Operation | Manual / automated / robotic integration |
| Total equipment mass | 8 kg |
| Spray gun mass, including 2.1 m protective sleeve | 2.1 kg |
| Assembly dimensions | Rack assembly: 275 × 270 × 210 mm |
| Spray gun with nozzle | 485 × 65 mm |
| Spray gun without nozzle | 355 × 65 mm |
| Maximum inlet air pressure | 9 bar |
| Operating air pressure | 5–8 bar |
| Compressed air consumption | 0.4 m³/min |
| Gas temperature at nozzle inlet | 200–600 °C |
| Single-phase AC supply | 210–240 V, 50–60 Hz |
| Maximum electrical consumption | 3.3 kW |
| Powder consumption | 0.1–0.8 g/s |
| Time to operating condition | No more than 10 seconds (specified) |
| Noise stated in specification | No more than 75 dB without shielded box; test conditions not supplied |
IS THIS THE RIGHT PLATFORM?
Start with your application.
Consider CSM108.2 for a compact, single-powder setup in research, process development or a defined application. Validate coating quality and cycle time on a representative part.
Materials and coating functions
The supplied specification lists aluminium, zinc, copper, nickel, tin and lead deposition families. Actual suitability depends on the selected grade, substrate and nozzle. Lead-containing materials need particular handling controls.
Potential work includes local restoration, conductive layers and surface protection. Ceramic, glass and polymer substrates need dedicated trials; the model name alone does not establish adhesion or service performance.
Find a powder by composition and purposeBefore the first trial
Check clean, dry air delivered at operating pressure; electrical supply; dust containment and extraction; operator protection; surface preparation; nozzle access; finishing and acceptance tests.
Do not infer electrical insulation from a metallic layer, or structural repair approval from successful deposition.
Let’s look at your part.
Send the substrate, dimensions, required result and a drawing or photograph.