Equipment used
CSM360 is the portable, manually operated system with two powder feeders. The handheld gun is connected to a separate powder station.
CSM360 specifications and setupBALTiCOLD SPRAY / HYDRAULIC CYLINDER REPAIR
Hydraulic cylinder repair.
Watch the process.
A filmed CSM360 workshop sequence. The video shows the process steps on the component; the notes below distinguish visible work from performance that still needs verification.
FILMED WORKSHOP CASE / CSM360
Hydraulic cylinder rod.
Local repair in practice.
Watch the operator work on a hydraulic cylinder rod, inspect the treated area up close and hand-finish the local repair.
- 01Local deposition
Manual passes place material in the selected repair area.
- 02Close-up of the surface
The camera shows the treated area before finishing.
- 03Hand finishing
The second clip shows mechanical dressing of the local surface.
What this footage demonstrates
Discuss a similar repair A workshop repair sequence on the component shown. Powder grade, final surface roughness, dimensional checks, adhesion results and service testing are not documented in these clips. Return to service requires the component’s agreed inspection and acceptance procedure.
Download video
FROM FOOTAGE TO YOUR APPLICATION
Use the case as a starting point.
Plan a comparable trial
Share the base material, damaged area, target dimensions and service conditions. Agree the surface checks and acceptance procedure before treating a service component.
Discuss a similar component